DONJOY Unique Mixproof Valve Matrix
DONJOY Unique Mixproof Valve Matrix is designed to allow two different products to flow through the valve at one time without risking cross-contamination, providing separation, CIP capable and leakage detection. Hygienic design meets US 3-A standard. It is widely used in food processing industries, mostly in dairy and beverage. Mix Proof Valve can work with think top.
Details about DONJOY Unique Mixproof Valve Matrix
Specification
| Size | 1 1/2" to 4" (DN40-DN100) |
|---|---|
| Body Material | AISI 316L |
| Temperature | 14°F to 266°F (-10 to 130°C) |
| Max pressure | 145psi (10bar) |
| Seal | EPDM, Silicone, FKM, FFKM, TEFLON, PTFE, HNBR, NBR, FDA approved |
| Pipe Joint Systems | DIN 3A |
| Operation | pneumatic actuator + Control-TOP |
| Surface treatment | Ra16-32µin (0.4-0.8µm), Ra 32µin (0.8µm) as default. |
| Certification | US 3-A, FDA, CE PED/2014/68/EC, Certification |
| Connection type | Tri-Clamp End, Butt Weld End |
DONJOY Unique Mixproof Valve Matrix
DONJOY Unique Mixproof Valve Matrix is designed to allow two different fluids to flow through the valve at one time without risking cross-contamination, providing separation, CIP capable and leakage detection. Hygienic design meets US 3-A standard. It is widely used in food processing, dairy and beverage, pharmaceutical industries. Mix Proof Valve can work with think top.
Hygenic Double Seat Mixproof Valve Feature:
● Continuous production capabilities, CIP cleaning and liquid processing at the same time.
● leakage chamber and the leakage detector could be self-cleaned by lifting off the seat
● Two independent plug seals
● One-piece Body & Clamped Body for choose from
● A wide selection of different body combinations.
● Easy disassembly by releasing the clamp
● Cleaning/Sterilization Parts for Options
● Ease of maintenance and service
● 100% hydraulic tested / 100% inspected
Operations
● Actuators
Stainless steel actuator
● Units for intelligent control and indication:
C-top control (on/off control unit)
IL-top control (Positioner)
Electric connection
AS-I bus connection
DONJOY Double Seat Mixproof Valve Body
Double Seat Mixproof Valve Working Principle
● Lift type mixing proof valve is remotely operated by compressed air. It is normally closed before running.
● The mixing proof valve is constructed with two independent plugs, which will form a leakage chamber to atmosphere under normal working status. When occasional failure causes leakage happens, the medium will flow into the chamber and be discharged at the outlet port.
● The leakage chamber is closed when the valve is operating, the medium can flow through one pipeline to another. This valve can be clean in place. Many options of CIP and SIP combination are available to users. (Refer to cleaning sterilization function options)
● Clean system can clean the upper, lower stem and leakage chamber, which ensure the valve to be high hygienic. Effectively cleaning system makes the fluid that special for (CIP) clean in place directly wash all the inside calve body, it takes shorter time than common cleaning system.
● Another benefit of the high cleaning system is that the lift type mixing proof valve can be applied to aseptic processing. If user’s steam into CIP pipeline, the system will constitute a shield that can isolate air.
Mixproof Valve Matrix 4×4
Mixproof Valve manifold control system
DONJOY offers Control Top, C-TOP 1721 PNP signal 3 solenoids
with C-TOP 1721 3 solenoid control with ASI communication can control 62 units.
with Feedback F-TOP-1553
Valve Matrix 8×6
Valve Matrix can consist of mix proof valve with butterfly valves, divert valve, ball valve, angle seat valve, safety valve or filters.
Double Seat Mixproof Valve Dimension
Hygienic Valve packing
DONJOY Mixproof Valve used for customer’s project
Frequency Ask Question
Please firstly leave message below for product you need and requirement,I will send you quotaion sheet,then choose the transportation way and check cost,we will send you Proforma invoice for confirm,at last make the payment and we will ship the goods to you.
Delivery time depends on quantity and type of products,for valve and pipe fittings regular is about 7-20days. For pump regular is about 15-25days.
For small amount we require 100% before production.For big amount,regularly T/T 30% deposit, 70% before shipment.
By Bank T/T, L/C, By Alibaba Assurance Order accept Credit Card VISA, Mastercard, E-checking, and we could’t accept Paypal.
