Sanitary Pneumatic Angle Seat Valve with Control Top
A sanitary angle seat valve is a pneumatically controlled valve with a piston actuator providing linear actuation to lift a seal off its seat. The seat is set at an angle to provide the maximum possible flow when unseated. Angle seat piston valves are particularly suited to applications where high temperatures and large flow rates are required, such as steam or water, air or gases. When used in reverse some models of angle seat valve will eliminate water hammer when operated.
Details about Sanitary Pneumatic Angle Seat Valve with Control Top
Specification
| Size | DN10-DN100, 1/2"-4" |
|---|---|
| Body Material | SS 316L, ASME BPE |
| Temperature | -20℃ to +150 ℃ (It depends on the seal) |
| Max pressure | 145psi (10bar) |
| Seal | PTFE/TFM, FDA approved |
| Pipe Joint Systems | DIN 11864,SMS, RJT, 3A, ISO, IDF |
| Manual Operation | Stainless steel handwheel, Plastic handle |
| Pneumatic Operation | Compatible with Single-acting or Double-acting Pneumatic actuator |
| Surface treatment | Ra16-32µin (0.4-0.8µm), Ra 32µin (0.8µm) as default. |
| Certification | US 3-A, FDA, CE PED/2014/68/EC, Certification |
| Connection type | Tri-Clamp End, Thread End, Butt Weld End, Flange End |
Sanitary Pneumatic Angle Seat Valve with Control Top
A sanitary angle seat valve is a pneumatically controlled valve with a piston actuator providing linear actuation to lift a seal off its seat. The seat is set at an angle to provide the maximum possible flow when unseated. Angle seat piston valves are particularly suited to applications where high temperatures and large flow rates are required, such as steam or water, air or gases. When used in reverse some models of angle seat valve will eliminate water hammer when operated. (Refer to Wikipedia)
Sanitary Angle Seat Valve Feature:
● Water hammer resistance.
● Without noise when opening or closing.
● No dead angle, non-retention.
● Suitable use for high-temperature fluid, gas, vacuum.
● Small flow resistance.
● Great sealing.
Hygienic Stainless Steel Globe Valve Connections
Weld end
Clamp end
Nut
Male thread
Female thread
Aseptic flange
Flange
DONJOY Stainless Steel Angle Seat Valve Different Configuration
Hygienic Angle seat valve with stainless steel actuator and Positioner
Positioner model is IL-TOP-1831
Input 0/4-20mA, Mode Bus RS485, DC24V
Positioner IL-TOP1831-P
Input 0/4-20mA, feedback 0/4-20mA,0-5/10V
Hygienic Angle seat valve with stainless steel actuator and Control Top on/off
Control top model is C-TOP-1721
PNP 4-20mA,DC24V,
For single-acting actuator C-TOP 1721 with one solenoid valve
For double-acting actuator C-TOP 1721 with two solenoid valves
Hygienic Angle seat valve with stainless steel actuator and Position Feedback
Position feedback model is F-TOP-1553
PNP 3 position, 4-20mA,DC24V
DONJOY Sanitary Angle Seat Valve KV Curve
Hygienic Valve packing
Frequency Ask Question
Please firstly leave message below for product you need and requirement,I will send you quotaion sheet,then choose the transportation way and check cost,we will send you Proforma invoice for confirm,at last make the payment and we will ship the goods to you.
Delivery time depends on quantity and type of products,for valve and pipe fittings regular is about 7-20days. For pump regular is about 15-25days.
For small amount we require 100% before production.For big amount,regularly T/T 30% deposit, 70% before shipment.
By Bank T/T, L/C, By Alibaba Assurance Order accept Credit Card VISA, Mastercard, E-checking, and we could’t accept Paypal.
